| Registration items | Test items | Test Methods | Test Ranges |
|---|---|---|---|
| Low Alloy Steel Elemental Analysis | Low Alloy Steel | CNS 10006 ASTM E415 |
C：0.03~1.20% Si：0.08~1.70% Mn：0.195~1.677% P：0.01~0.074% S：0.0078~0.073% Cr：0.111~3.03% Mo：0.025~0.98% V：0.01~0.496% Cu：0.022~0.694% Ni：0.019~3.50% |
| Austenitic Stainless Steels Elemental Analysis | Austenitic Stainless Steels | CNS 10006 ASTM E1086 |
C：0.022~0.152% Si：0.17~1.14% Mn：0.40~1.70% P：0.008~0.037% S：0.008~0.026% Ni：5.66~14.74% Cr：12.35~19.06% Mo：1.59~3.55% |
| Al-Si Alloy Elemental Analysis | Al-Si Alloy | ASTM E1251 | Si：6.20~8.00% Fe：0.07~0.85% Cu：0.039~0.21% Mo：0.022~0.41% Mg：0.10~0.66% Zn：0.03~0.34% Ti：0.05~0.17% |
| Fatigue Test | Torsion bar | MIL-S-45387B | ψ80mm max L500mm~2400mm |
| Tension Test | Metals and Metal Products | CNS 2111 | 9.8~441kN |
| Rockwell Hardness | Metals and Metal Products | CNS 2114 | 20~65 HRC 40~100 HRB |
| Salt Spray Test | Mechanical Hardware Metals and Products | CNS 8886 | Neutral Salt Spray |
| 3D Coordinate Measuring Detecting | Part of Assembly | In-house Method (Document No.：WLWI-125) | X Axis: 0~1200mm Y Axis: 0~2000mm Z Axis: 0~900mm |
| Registration items | Test items | Test Methods | Test Ranges |
|---|---|---|---|
| Material Identification Test | Rubber and Related Products | In-house Method ，Document No.：WLWI-117(Based on ASTM D3677) | EPDM Rubber, Oil Resistance Rubber Related(Acrylic Rubber(ACM), Chloroprene Polythylene(CSM), Acrylonitrile-Butadiene Rubber(NBR), Chloroprene Rubber(CR)) |
| Hardness Test | Rubber and Related Products | CNS 3555 | Durometer A Type20~90 |
| Tension Test | Rubber and Related Products | CNS 3553 CNS 687 |
49~490N 5~50kgf |
| Bending with Heat Resistance Test | Rubber and Related Products | CNS 3551 Sec. 2.10 | |
| Deformation under Loading and Heat Test | Rubber and Related Products | Standard Material Requirements for TPC C001,C035(Draft) | |
| Ageing Test | Rubber and Related Products | CNS 3556 CNS 687 |
50~200℃ Change in Hardness, Elongation Change, Tensile Strength Changes, Tensile Stress |
| Immersion Test | Rubber and Related Products | CNS 3562 Sec. 4 Test Lubricants No.1 Oil and No.3 Oil |
Visual Inspection, Volume Change, Change in Hardness, Elongation Change, Tensile Strength Changes |
| Ozone Test | Rubber and Related Products | CNS 10018 CNS 687 |
25~600pphm 0.25~250pphm 15~50℃ |
| Compression Set Test | Rubber and Related Products | CNS 3560 |